|
Wet/Dry Filters and Sumps
These filters are rated for saltwater aquariums, but are
great for fresh water as well. Their efficiency greatly increases when used for
fresh water, enabling them to support aquariums much larger than the saltwater aquariums
they are rated for. These filters are capable
of carrying large chemical-waste loads, and thus maintain consistent water quality. This is especially important for fish, corals, and
invertebrates sensitive to poor or fluctuating water conditions. Check out the 110
gallon cichlid tank with a wet/dry filter on the 'Installations' page. |

|
The SL-20
measures 26" x 12" x 17". It has an
11 gallon bio-media capacity, enabling this filter to support saltwater aquariums
up to 220 gallons! The SL-20 is small enough to fit
under a 75 gallon aquarium. Includes a hinged cover, drip-plate, two
1" bulkhead fittings, plumbing kit (ball valve, PVC fittings, and PVC pipe) and has a
sump large enough for water pump, protein skimmer, etc. Does not include water pump or bio-media.
Cost: $360.00 |
SL-20
(above) |
|
|
|

|
This is SkyLab's new 'Rip Tide'
wet/dry filter!! So new that it's still only on paper, but the prototype is on its
way! This wet/dry was designed to fit under wooden stands of smaller tanks (should
fit under most tanks that have a 12" width; i.e. 10, 15, 20, 29, 30, & 55 gallon
tanks). It will have a 1" drain and a 3/4" return. The 'Rip Tide'
will also have a glass canopy. Water pump area will be 4" x 9." Does
not include water pump or bio-media.
Cost: $155.00 |
NEW! |
Rip Tide
(above) |
NEW! |
|
| |
|

|
The MiniSump is the perfect
solution for those with smaller aquariums who want to add a live sand/mud sump to their
system. It measures 24" x 13" x 13" and has a 1" bulkhead for
drain and a 3/4" bulkhead for return flow. The partition near the input end is
3" from the respective end and is 10.25" tall. The second partition is
6" from its respective end and is 10" tall (1/4" shorter than the first for
water flow). Does not include water pump.
Cost: $200.00 |
SL-MiniSump (above) |
|
| All SkyLab® wet/dry
filters are made of glass (no warping like acrylic can!), and are assembled with parts
from Universal Aquatics®. The pictures on
this page illustrate our basic designs. However,
dimensions can be altered and features can be added to meet any specifications you may
have. Just ask if you have a special need! |
Refugiums

| AquaFuge
MP |

|
This sump-based refugium is hand-crafted in the USA with
the highest quality acrylic. The AquaFuge MP includes a pre-filter bag to trap
detritus before entering the refugium and can be adjusted to accomodate your drain line.
An additional pre-filter bag can be added for overflows with two drain lines. The addition
of a refugium can stabilize your marine ecosystem by providing nutrient export with the
growth of macroalgae as well as create an isolation area for new or injured fish. Each
size is designed to accomodate a CPR light fixture which fits neatly over the refugium to
provide light to the refugium inhabitants. |
| AquaFuge MP Small Dimensions: 26" L x 10" W x 12" T;
Product Code:
AFMPS; Cost: $270 (with light and
grey stand $296) No additional shipping or handling fees! |
Without light --> |
|
| With light --> |
|
| AquaFuge MP Medium Dimensions: 30.5" L x 12" W x 14" T; Product Code: AFMPM; Cost: $322
(with light and grey stand $360) No additional shipping
or handling fees! |
Without light --> |
|
| With light --> |
|
| AquaFuge MP Large Dimensions: 36" L x 12" W x 16" T;
Product Code: AFMPL; Cost: $390
(with light and grey stand $440) No additional shipping
or handling fees! |
Without light --> |
|
| With light --> |
|
| |
See lighting options below. |
|
| AquaFuge Lighting Options |
| To compliment our popular line of Aquafuge Refugiums, we are proud to
introduce our own CPR brand lighting fixtures. These lights are designed specifically for
use with our Aquafuges and feature an attractive silver housing, efficient
reflector, and a replacable external starter. These lights have two stand options; the
standard grey plastic stands or our hancrafted clear acrylic stands that act as an
external brace to provide additional structural support for the Aquafuge. Our new
CPR lights come in three different bulb wattages, 18w, 24w, and 36w and will provide ample
light for your refugium inhabitants to stay healthy and happy. |
CPR Light
 |
Acrylic Light
Stand
 |
|
| Product Code: |
For Use With: |
Includes: |
| CPRL1318 |
AFSM, AFPROS (AquaFuge PRO,
AFMPS (x2) |
18W Daylight Bulb |
| CPRL1624 |
AFMD, AFPSS, AFPSL, AFPROL,
AFMPM |
24W Daylight Bulb |
| CPRL2436 |
AFLG, AFMPL |
36W Daylight Bulb |
| AFSTND |
AFSM, AFMD, AFLG |
Stand For Aquafuge HOB
Refugiums |
| PSSTND |
AFPSS, AFPSL |
Stand For AquaFuge PS |
Note: One or
two light fixtures can be used with our AquaFuge PRO and MP sump-based regugiums to
meet the needs of your refugium inhabitants.
 |
|
|
| AquaFuge PRO |
|

|
| The
AquaFuge PRO is a sump-based refugium which incorporates a protein skimmer in order
to maintain safe organic levels while also providing for oxygenation of any marine system.
Refugiums can be used to
cultivate food sources such as algae and micro-fauna, while also being used for nutrient
export from a marine system.
The AquaFuge PRO is
designed for use with various mediums including mud, live sand, and live rock.
Now available in two sizes for
greater versatility. |

|
| AquaFuge
PRO Small Dimensions:
32" L x 12" W x 14.5" T; Product Code: AFPROS; Cost: $372 (with light and grey stand $425) No additional shipping or handling fees! |
Without light --> |
|
| With light --> |
|
| AquaFuge
PRO Large Dimensions:
36" L x 12" W x 16" T; Product Code: AFPROL; Cost: $420 (with
light and grey stand $495) No additional shipping or
handling fees! |
Without light --> |
|
| With light --> |
|

|
See lighting options above. |
| AquaFuge2 |

|
| CPR's AquaFuge2 hang-on refugiums come in
three different sizes to meet the needs of marine aquarists.
Recently redesigned with a black
acrylic backing to prevent light from transfering to the main aquarium, each model comes
with a powerhead and features a unique baffle system. This prevents the substrate and
organisms from being disturbed yet also allows enough water to flow through the eliminate
any stagnant areas. Also includes the New Bubble Eliminator to stop bubbles from entering
the tank from the outlet.
The AquaFuge2 provides ideal
growth conditions for food items, such as copepods and ampipods, to feed invertebrates and
fish in the main tank.
It provides a controlled growing
area for macroalgae, which can be used to reduce "nuisance" algae in the main
tank and provided a "nursery" area for a variety of organisms. |

|
|
| AquaFuge2
Small Includes Powerhead, Water Capacity: 2.50 Gallons, Dimensions:
13" L x 4.5" W x 12" T; Product Code: AF2SM Cost: $140
(with light and grey stand $170) No additional shipping or handling
fees! |
Without light --> |
|
| With light --> |
|
| AquaFuge2
Medium Includes Powerhead; Water Capacity: 3.60 Gallons; Dimensions:
19" L x 4.5" W x 12" T; Product Code: AF2MD Cost: $155
(with light and grey stand $200) No additional shipping or handling
fees! |
Without light --> |
|
| With light --> |
|
| AquaFuge2
Large Includes Powerhead; Water Capacity: 4.70 Gallons; Dimensions:
25.5" L x 4.5" W x 12" T; Product Code: AF2LG Cost: $175
(with light and grey stand $235) No additional shipping
or handling fees! |
Without light --> |
|
| With light --> |
|
|

|
See lighting options above. |
CPR Wet/Dry Filters
|
The CR2000 has a
bio-media capacity of 1 cubic foot and is rated for aquariums up to 200 gallons. It
includes Bio-Bale media, a 1" bulkhead for the drain, and a 3/4" bulkhead for
the return. It can be purchased as is in the photo, or as a combo that includes the
filter, overflow (cs100), Bio-Bale, and hose. Measurements: 24" x
12.5" x 20" |
CPR CR2000
(above) |
CR2000 $285.00 |

|
CR2000 Combo
$355.00 |

|
| |
No additional
shipping or handling fees! |
|
The CR900 wet/dry filter
measures 21" x 10" x 15.5" and is for aquariums up to 125 gallons. It
has a 4 gallon bio-media capacity and is made of acrylic. Its open sump design
allows plumbing to exit through the top of the sump without additional fittings; it is
fitted with a 1" bulkhead for a drain. Can be purchased alone or as a combo
with filter, overflow (cs90), Bio-Bale, and hose. |
CPR CR900 (above)
|
CR900 $200.00
|
|
CR900 Combo
$275.00 |
|
| |
No additional
shipping or handling fees! |
|
The CR1000 measures 20" x
12" x 15" and is for aquariums up to to 150 gallons. This wet/dry is
fitted with a 1" drain and a 3/4" return. It is made of acrylic and has a
5 gallon bio-media capacity. Bio-Bale media is included, and can also be purchased
as a combo that includes filter, overflow (cs100), Bio-Bale, and hose. |
CPR CR1000
(above) |
CR1000 $240.00
|
|
CR1000 Combo
$320.00 |
|
| |
No additional
shipping or handling fees! |

|
The CR500 is an acrylic wet/dry
filter for tanks up to 60 gallons and measures 16" x 8" x 12." Its
narrow 8" width allows it to fit under any stand. It has a 2 gallon bio-media
capacity and is fitted with a 3/4" drain. It is not fitted with a return
bulkhead as the open design at this end of the sump allows the plumbing to exit straight
out of the top of the sump. This can be purchase by itself, or as a combo that
includes the filter, hang-on overflow (cs50), Bio-Bale, and hose. |
CPR CR500 (above) |
CR500 $155.00 |
 |
CR500 combo
$220.00 |
 |
Back to Main
Page
|