|
Internal Overflow Boxes
These overflow boxes are black acrylic.
| Due
to the process of bending acrylic and because these overflows are handmade to your
specifications, there may be slight variations from requested dimensions on occasion.
These deviations are usually less than 1/4" off. |
| When ordering an
overflow, please include the following info. in a message with your payment to prevent
delays with your order: |
| ~ Exact height of the box. Read below to determine the height. |
| ~ Whether the overflow is for a glass or
acrylic tank. |
| ~ Desired length and width of box (e.g.
6" x 6" ; 5" x 8" x 5"...) |
| ~ If ordering a 2-sided overflow that is
not symmetrical (e.g. 6" x 8"), I need to know if you want the box cut for the
back left or right corner. |
| ~ If ordering a 3-sided box and you want
the sides bent at 45 degrees, I need the following info: width of the front of box;
and distance the front of the box should be from the back wall of tank. If you want
the 'spread' of the back of the overflow to be a certain width, include that too. |
| Be sure to check
for overflow boxes on clearance! And don't forget to order your silicone
or Weld-On to install your overflow (see below). |
There are no shipping or handling charges for these overflows!! |
Two-sided corner overflows |
| 15" (height) |
$90.00 ea. |
|
| 16" |
$95.00 ea. |
|
| 17"
|
$100.00 ea. |
|
18" |
$105.00
ea. |
|
19"
|
$110.00 ea. |
|
20"
|
$115.00 ea. |
|
21"
|
$117.00 ea. |
|
22"
|
$120.00 ea. |
|
23" |
$122.00 ea. |
|
24"
|
$130.00
ea. |
|
| 25"
|
$133.00 ea. |
|
| 26"
|
$136.00 ea. |
|
| 27"
|
$140.00 ea. |
|
| 28"
|
$145.00 ea. |
|
| 29"
|
$150.00 ea. |
|
| 30"
|
$155.00 ea. |
|
| 31"
|
$160.00 ea. |
|
| 32" |
$165.00 ea. |
|
| 33" |
$170.00 ea. |
|
| 34" |
$175.00 ea. |
|
| Available as either 6" x 6", 6" x 7",
6" x 8", etc.; specify with payment or via email. Larger (L x W)
boxes may have additional costs. |
| Add plexi-glass reinforcement (2 sided) for 1/2" total thickness
-- $45.00 |
|
|
| 15"
(height) |
$105.00 ea. |
|
| 16"
|
$110.00 ea. |
|
| 17"
|
$115.00 ea. |
|
18"
|
$120.00
ea. |
|
| 19"
|
$125.00 ea. |
|
| 20"
|
$128.00
ea. |
|
21" |
$130.00
ea. |
|
22"
|
$133.00
ea. |
|
| 23"
|
$138.00 ea. |
|
| 24"
|
$145.00 ea. |
|
| 25" |
$147.00 ea. |
|
| 26" |
$150.00 ea. |
|
| 27" |
$155.00 ea. |
|
| 28" |
$160.00 ea. |
|
| 29" |
$165.00 ea. |
|
| 30" |
$170.00 ea. |
|
| 31" |
$175.00 ea. |
|
| 32" |
$180.00 ea. |
|
| 33" |
$185.00 ea. |
|
| 34" |
$190.00 ea. |
|
Available as 6" x 8" x 6",
etc.; specify with payment or via email.. Other sizes upon request. Larger (L
x W) boxes may have additional costs. |
| Add plexi-glass reinforcement (3 sided) for 1/2" total thickness
-- $55.00 |
|
|
 |
 |

|
Four
sided/Center overflows |
| 18" (height) |
$150.00 |
|
| 19" |
$155.00 |
|
| 20" |
$160.00 |
|
| 21" |
$165.00 |
|
| 22" |
$170.00 |
|
| 23" |
$175.00 |
|
| 24" |
$180.00 |
|
|
Overflow boxes are available in
other sizes and shapes. We'll make whatever you need to fit your
aquarium. Just email us with any specific need that you have.
|
| **To get the correct height of the box, it should measure from the bottom of the aquarium up to 1/8 of
an inch below the bottom of the top trim of the aquarium. In other words, the
overflow should be as tall as possible without the top trim preventing it from being able
to fit flat against the glass. For example, to the right is a photo of a tank whose
top trim (at the bottom of the trim) is about 15 3/4" from the bottom of the tank;
the overflow needs to be about 15 5/8" tall. If the measurement of the
internal overflow box you need falls between two of the measurements above, purchase
the one closest to the size you need. Then include a message indicating the exact
size needed. PayPal will allow you to include a message with your order, but to be
safe you can send me an extra email with your specifications. clschwalm@comcast.net |

|

|
CRL Silicone Sealant; 10.3 fl. oz.
tube. Great to seal internal overflow boxes into place. |
$9.75 ea. |
|

|
Weld-On #16 clear, thickened acrylic cement;
1.5 oz tube. |
$15.00 ea. |
|

|
Weld-On #16 clear, thickened acrylic cement;
5 oz tube. |
$25.00 ea. |
|
| |
Aqua blue spray
paint, 12 oz. can. Matches the blue acrylic we use for overflow boxes. |
$9.00/can |
|
| |
Black spray paint, 12 oz. can. Blends
black overflow boxes into the background. |
$9.00/can |
|
|
One of the advantages of the internal
overflows over the hang-on prefilters is flow rate. Because a deeper water
column can develop in an internal box, a greater water pressure exists at the bulkhead
pushing more water through/given time interval. So an aquarium drilled with a
1" hole for a drain will be able to drain more water out than a hang-on overflow with
a 1" drain.
Because the water pressure in large
aquariums can cause acrylic overflow boxes to bow-in, special boxes should be used.
Generally, if the aquarium is more than 30"
tall this is done. For large aquariums,
a box is first made out of glass, then covered with acrylic ---> no
bowing!
Each overflow box is made to order for
your specifications. Because each one is made after being ordered, expect shipping
to be delayed by a couple of days. Thanks for your patience!!

|

|
| This is a large
overflow drilled on each side for closed loop returns. Each return has a 1.5"
bulkhead. This overflow measures 29" x 15" x 8." If you need an
overflow similar to this one, you can purchase it here (otherwise email for quote).
When purchasing, please include the exact dimensions your overflow needs to be.
Cost: $230.00 (no S or H charge)
|

|
This is a small
overflow built to fit in the upper back right corner of a nano reef tank. In a small
tank, this is the perfect overflow where space is an issue. Cost: 2-Sided:
$60.00; 3-Sided: $65.00 (no additional S or H fees). |
2-Sided: |
|
3-Sided: |
|

|
This is an overflow wall
used to partition off the back part of a tank which can then be used as an in-tank
wet/dry, sump, etc. To order one of these, simply order an overflow above with the
nearest dimensions and include a note with your payment telling me to NOT bend the
overflow. For a width of 14" or less, order a 2-sided overflow with the correct
height. For a width greater than 14" order a 3-sided overflow with the correct
height. |
| Use the PayPal buttons below to pay for special requests. Just
add the proper denominations to your cart to sum up to the price you were quoted.
With your payment include your name and a very brief description of what you are ordering;
detailed descriptions here are unnecessary as we would have already discussed your
order. For example, "John Doe's special overflow box" would suffice. |
| $1.00 |
|
| $5.00 |
|
| $10.00 |
|
| $20.00 |
|
| $50.00 |
|
| $100.00 |
|
Back To Home Page
|